Coralscaper is a special biopolymer adhesive, for permanent fixation of coral scions and decorative objects in all saltwater aquariums.
Coralscaper has a very low melting point of about 40 °C. This makes it suitable even for sensitive corals and remains malleable and processable for a longer time in and out of the water.
Coralscaper hardens white/transparent and is quickly overgrown by coral tissue or red coralline algae.
Coralscaper is made of biopolymers and is safe for all living things in the aquarium.
Tips:
• Generally, hot tap water out of the tap is enough for heating.
• You can also heat the granules in a glass with water in the microwave until
the granules turn glassy.
- Cured residues can be reused at any time by reheating them.
• The material is readily malleable, so there are almost no limits in the
application.
• If you are sensitive to heat, the granules can also be removed with a pair of
tweezers or a fork from the hot water.
Dosage:
Put the desired amount of thermal adhesive in a glass of water at approx. 45 °C and wait until it is completely glassy.
Then remove the granules, knead briefly and process immediately.
