Mitras lightbar is not only one of the brightest LED lights on the market. It also convinces by the technical know-how.
- Outstanding Light Performance
- Uniform Light Distribution
- Innovative Cooling System
- Operation, Dimming and Equipment
Mid color temperature: 18500 K
7 Color Channels (dimmable via ProfiLux)
LED-Configuration per 10 cm Lightbar:
- 1x Hyperviolett 425 nm
- 1x Royal blue 455 nm
- 1x 8000 K
- 1x Deep blue 450 nm
- 4x Cree CLX6D, red 622 nm, green 530 nm und blue 472 nm
- White LEDs with 150 lm/W
Spectrum: All channels at 100%
Mounting in the tank
With the supplied stainless steel brackets, Mitras Lightbar 2 can be conveniently mounted above every tank.
Power supplies
To save space and costs, several luminaires can be operated via a splitter on one power supply unit. Please note that the luminaires are therefore supplied without a power supply unit. Please order the appropriate power supply unit for your luminaires separately. See the Configurations section below.
The following power supplies are currently available:
80 W, 100 W. 150 W, 200 W, 240 W, 300 W
Operation Modes
Mitras Lightbar can be operated undimmed and dimmed.
If operated undimmed all LEDs will burn at 100%. There is no control needed. Activation and deactivation can be made through a simple timer.
Another option, however, is to dimm and operate the Mitras Lightbar with a ProfiLux Controller (starting version 3). All color channels can thus be dimmed independently. So all of the ProfiLux Controllers simulation programs such as sunrise and sunset, cloud simulation, thunderstorms or calendrical moon phase simulation are possible.
Configurations
Configurations
