We are proud to introduce you to our DaStaCo® II (dual) calcium reactor.
Unique in its genre and never before has technology been used so ingeniously.
This easily leaves all existing calcium reactors (regardless of the output) behind.
ONBOARD:
Integrated and maintenance-friendly electronic pH control box
Connection for ALK pilot
digital display
This unit works without an expensive and brittle pH probe.
Benefits:
No need to buy a pH controller
No more adjusting a pH controller
No more calibrating a pH probe
Fully automatic venting possible with an additional timer
All residual gases are completely and automatically pressed out of the Co² reactor.
Benefits:
No more failure of the calcium reactor due to residual gases (install and forget)
100% Co² saturation
Double reactor in the smallest of spaces
Larger water volume and yet a very compact device
Just one setting point: keep it stupid, keep it simple
This calcium reactor only needs to be regulated at one point, depending on the consumption of the aquarium.
Benefits:
Clear
Special knowledge in connection with the whole pH history is no longer necessary (pH value is already electronically determined in advance)
KH booster
Due to its extreme performance, you can get an ultra-high KH output after just one hour, if desired
Benefits:
No more KH problems in the aquarium
Extremely low energy consumption (5 watts)
What does the DaStaCo® II DigiTegra Controller do
The intelligent DaStaCo® II DigiTegra controller regulates the following 3 functions:
1. Flow Control
This allows the owner to regulate the flow speed of the metering pump in order to be able to regulate the DaStaCo® II extremely precisely and in a stable balance of lime consumption
2. Co² Control
With this, the DaStaCo® II regulates the Co² supply completely automatically depending on the need for the DaStaCo® II, and adjusts it automatically when the water flow is increased/decreased. The DigiTegra controller replaces the pH controller and a pH probe, so unnecessary calibration at regular times is no longer necessary.
3. Alarm Control
The DaStaCo® II DigiTegra controller monitors whether the Co² bottle is empty and has to be refilled. In this case, the Co² solenoid valve is automatically closed (otherwise this would be senselessly activated since no more Co² arrives in the reactor). The owner is informed of this by an LED message and an acoustic signal.
In this way, you are informed in good time before the KH value in the aquarium has the chance to drop.
The DaStaCo® II DigiTegra Controller monitors whether the circulation pump is defective or blocked. In this case, too, the Co² solenoid valve is automatically closed. The owner is informed of this by an LED message and an acoustic signal.
The DaStaCo® II DigiTegra Controller monitors whether there is a leak in the Co² supply to the reactor. In this case, too, the Co² solenoid valve is automatically closed. The owner is informed of this by an LED message and an acoustic signal.
The DaStaCo® II DigiTegra Controller monitors:
the lack of automatic venting (e.g. due to a defective external timer)
Presence of excess foreign gases.
Dosing pump inflow at the wrong place, e.g. near the protein skimmer, sucking in too many air bubbles.
Dosing pump inflow incorrectly set over water or slipped.
the lack of Co² start commands (e.g. yellow/red probe disconnected).
Defective dosing pump or incorrect use of non-self-priming pumps.
Clogged suction or delivery line on the dosing pump (e.g. kink in the waterline).
The dosing pump and Co² solenoid valve are automatically closed in these situations.
The DaStaCo® II owner is automatically informed of this by an LED message and an acoustic signal.
These additional self-diagnosis functions also inform you in good time before the KH value in the aquarium has a chance to drop.
Dimensions:
DaStaCo® II Classic T4 1400L, 45 L x 76 H x 18 cm cylinder diameter
Sufficient for aquarium systems up to 1400 liters
First filling 20 kg
Can be used from a consumption of 0.25 dkh per day
