With the DD KH Manager E1 Interface Box, up to two DD P4/P4 PRO dosing pumps can be connected to the DD KH Manager or a single Kamoer FX-STP peristaltic pump. Additional data connection cables, which are available separately, are required to connect P4/P4 PRO pumps.
Only cloud versions of the DD P4 pump(s) using the Kamoer Remote App can be connected to the DD KH Manager. Both the DD KH Manager and the DD P4/P4Pro dosing pump(s) must be connected to the same cloud account via a router in order to use the control function.
Connection to the DD P4 and P4 PRO pumps allows automatic adjustments to the programmed schedule of one or more dosing pump heads after each KH test, eliminating problems with over- or under-dosing that are common with traditional dosing methods. When you control a single dosing head for the KH buffer, your programmed additions will be automatically increased or decreased depending on the test result and the parameters you set in the DD KH Manager to get a stable KH value. All dosing heads of the DD P4/P4 PRO pumps that should not be automatically adjusted can be set to run an independent dosing schedule as usual, without the KH Manager making any adjustments.
With this control, multi-part dosing systems can also be adjusted by the KH manager or the dosing of other elements such as calcium and magnesium can be increased or decreased with the KH consumption of your aquarium.
When you connect a Kamoer FX-STP, the connection allows the KH Manager to turn the FX-STP on or off for a specified time depending on the test results. The speed of dosing can still be controlled via the FX-STP.
When used with the FX-STP nothing further is required for the connection, when used for the P4/P4PRO a data cable is required from the E1 to the pump, when used with 2 x P4/P4 Pro two data cables are required.
- Secure 'Click Lock' data port connection to KH Manager
- Two output communication ports for P4/P4PRO connection
- Power input and output connectors for Kamoer FX-STP
- Status indicator lights
