Kategorier

Aquatic Nature Phosphat Stop M Seawater - 300 ml

Brand :

160,-

Bestillingsvare, 2-4 ukers leveringstid.

Aquatic Nature Phosphate Stop M Seawater absorbs phosphate from the aquarium in a rapid and efficient manner (PO4)

High levels of phosphate and nitrate are fairly rare in the natural biotopes of tropical fish. However, in our aquariums, this is not necessarily the case due to uneaten food, fecal matter, insufficient filtration, skimming, and certain types of active carbon (acid-rinsed carbon) which can cause the limit to be exceeded which in turn can result in a rapid and undesirable not to mention uncontrollable growth of algae. Tap water is generally not suitable for setting up of saltwater aquaria, and for this reason, osmosis water is recommended for the preparation of aquarium water.

Invertebrates and particularly hard corals are extremely sensitive to slight amounts of phosphate. PHOSPHAT M absorbs phosphate from the aquarium in a rapid and efficient manner (PO4). In this way, vital elements are removed from algae, which results in a curbing of the growth of the algae, and its ultimate  disappearance. The water quality improves, algae disappears and invertebrates, particularly hard corals, can thrive. Optimal phosphate levels in a saltwater aquarium lie between 0.05 and (a maximum of) 0.1 mg/ltr. Invertebrates and caulerpa species tend to use a small amount of phosphate, for which reason a  completely phosphate-free aquarium is not desirable. It is, however, important not to exceed the ideal value of 0.1 mg./ltr., since above this limit too many materials are present that can hinder the growth of tissues in corals.

USAGE: Rinse the PHOSPHAT STOP M for 2 minutes with lukewarm aquarium water. Place the PHOSPHAT STOP M in the filter and make sure that the strongest possible water flow occurs. By saturation, the absorbed phosphates will not be released back into the water. The PHOSPHAT STOP M is saturated when phosphate (PO4) values begin to increase again

PACKAGING: 300 ml packaging for aquariums to max. 300 ltr with values of 0.1 to 1 mg./ltr. 600ml packaging for aquariums to max. 600 ltr with values of 0.1 to 1 mg./ltr.