The formula for the chemical composition of Components Pro is based on the method developed by H.W. Balling, however, it has been modified and enriched with microelements necessary for the proper functioning of the marine aquarium. In this way, we obtained three fluids indicated to be dosed regularly, in equal amounts, in order to satisfy the requirements of the corals not only in magnesium and calcium, but also in all the other elements in which individual dosing is difficult under home conditions and that require careful and systematic distribution. The maintenance of adequate levels of magnesium and calcium allows to preserve the adequate amount of microelements in the reef aquarium (Ca 380-460 ppm, Mg 1180-1460 ppm). In aquariums with an average population of hard corals the dose is about 12 ml per day for 100 liters of water.
Component 1 Pro contains: Ca, Mg, Sr, Ba, Co, Mn, Cu, Fe, Zn, Ni, Cr, Mo (25 ml / 100 l increases by 9 ppm Ca). Component 2 Pro contains: HCO3, F, I (25 ml / 100 l raises the KH of 1.3 dKH, Alk 0.46 meq / l). Component 3 Pro contains: Mg, mineral salts and S, K, B, Sr, Li (25 ml / 100 l increases 0.76 ppm Mg). Keep out of the reach of children. To be used only in aquariums. Unsuitable for human consumption. Safety data sheet available on request.
What’s great about this product?
The highest efficiency set of crucial elements
Experience based formula
Raises & stabilizes pH level
The most concentrated fluids to meet all the aquarium’s needs
Provides ionic balance
Dosage
With an average coral stocking: 12 ml daily/100 liters (27 US gal) of water
Good to know
Due to the high product concentration, a white, gelatinous precipitate may appear after Component 2 Pro contacts the water. This is completely natural and safe for the aquatic life. In order to facilitate the dissolution of it, the Component 2 Pro dosing pump outlet should be placed in a high water flow
It’s best for your corals to split the daily dose into as many small doses as it’s possible