Kategorier

Adaptive Reef Controller Cabinet

Brand :

8 700,-

Bestillingsvare, 2-4 ukers leveringstid.

The Adaptive Reef Controller Cabinet is a modular wire management system that allows you to customize your equipment organization in a clean and professional-looking manner. Using interchangeable faceplates, you can mount and display everything from controllers and modules, to dosers and pump drivers. On the inside, you can hide all your cords and power bricks. You’ll be able to safely mount power supplies, power strips, and organize your cords so they don’t detract from the beauty of your aquarium. The Controller Cabinet is designed to be placed inside your aquarium stand or beside it as a standalone piece of furniture. The front of the cabinet is attached using rare-earth magnets so you can easily detach it to access the interior.

The Controller Cabinet isn’t like a piece of IKEA furniture, where it looks easy to assemble but turns out to be anything but. You’ll be able to put the cabinet together in 15 minutes or less. There are instructions included inside the box and each piece is labeled to help get you up and running quickly.


Controller Cabinet At-A-Glance

  • 100% water-resistant and non-conductive
  • The front of the cabinet has magnets so you can attach/detach it quickly and easily
  • 8 power brick shelves to secure power supplies
  • 4 interchangeable faceplates are included
  • Zip-tie tracks lock power bricks in place
  • Fits inside some Red Sea and Waterbox Aquarium standsSpecifications
  • Dimensions: 38cm x  47cm x 66cm (LxWxH)
  • Materials: 12.7mm and 6.35mm PVC Board
  • Faceplate Slots: 8
  • Color: Choice of Black or White

Neatly Organize Wires and Mount Power Bricks

There are multiple wire management solutions inside the cabinet. There are eight power brick shelves to secure power supplies up off the ground. This reduces the risk of failure, prevents your power supplies from getting wet, and lessens the likelihood of a fire hazard since your power bricks aren’t all stacked dangerously on top of one another. Zip tie tracks abound so you can lock power bricks in place and neatly arrange cords to get rid of “cable spaghetti.”


There are 4 faceplates included with every Controller Cabinet

  • 1 x faceplate with 3 cutouts for cords - Double Slat
  • 1 x faceplate with 6 cutouts for cords - Quad Slat
  • 2 x blank faceplates - Single Slats

What’s Included?

  • Controller Cabinet Assembly
  • Hardware and stainless steel screws for assembly
  • 8 power brick shelves to secure power supplies
  • 1 x faceplate with 3 cutouts for cords - Double Slat
  • 1 x faceplate with 6 cutouts for cords - Quad Slat
  • 2 x blank faceplates - Single Slats
  • Instructions