Administer 50 ml per 100 | volume of raw water, AMS RidRed liquid. If all of the solution is not used, you can save the solution at refrigerator for later use.
Use: First siphon off (as much as possible) all visible cyanos from the aquarium system. Remove all filter media or absorbents (charcoal active, phosphate absorber, zeolite, etc …)
- Turn off UV and ozonator.
- Make sure you have a good mix in the aquarium.
- Because the skimmer overreacts during processing (over-skimming), it is preferable to remove the cup from the skimmer, or deactivate the skimmer in case external skimmer.
- Provide a sufficient oxygen supply by an additional air pump + stone of air or let the skimmer run without the cup if it is placed inside the decanter.
- A treatment lasts 48 hours. After 48 hours, do a 20% water change with Royal Nature Ion-Balanced salt and put AMS SuperCarbon (ultra-pure activated carbon) in a fluidized bed filter. 24 hours later, all filtering or absorbing media and UV, ozonator, etc. can be put into service again.
- It is normal that the skimmer after the water change does not work not yet normally (over-skimming), keep this in mind and regularly check the bucket. It is recommended to carry out an intensive bacterial treatment (AMS Bacti Pro- extra) finally to increase the population of good bacteria after treatment.
- Use of AMS Bacti Pro-extra after the anti-cyano treatment: The first week: Every day, the dose of 5ml/100L. The following weeks: 1x per week, the dose of 5ml/100L until the end of the last bottle.
Product description in general: AMS BACTI-pro Extra For (re)starting aquarium systems: *Strongly reduces ammonia and nitrites. *Restores the bacterial population after using an anti-cyano or other treatment treatments. *Works probiotically against emerging or weakly present cyano. *Works naturally against also emerging or already present dinoflagellates.
Shake the bottle well before use!